Truck Topper Door Replacment Parts
For Handles, Locks and Accessories CLICK HERE
Topper Door Seal - Double Leaf - T
(picture of actual item)
(side view)
Description: Rubber seal for most fiberglass toppers with aluminum framed rear doors
- Black
- For Fiberglass toppers with aluminum framed rear door
- 1 3/4" overall wide
- 3/16" "T" width
- Sold in 6 foot sections
Item ID: 3925
Topper Door Seal - Single Leaf
(picture of actual item)
(side view)Description: Rubber seal for most aluminum toppers with aluminum framed rear doors
- Black
- 1" wide
- 3/16" "T" width
- Sold in 6 foot sections
Item ID: 3926
Topper Door Seal - Double Leaf - With Bulb (V Channel)
(picture of actual item)
(side view)
Description: Rubber seal for most fiberglass toppers with aluminum framed rear doors
- Black
- 1 5/8" wide
- approximately 3/16" width of triangular track
- For fiberglass toppers with aluminum framed rear doors
- Bulb for extra seal
- Strip that slides into the track is triangular or V shaped
- Sold in 6 foot sections
Item ID: 3927
Topper Door Seal - Double Leaf - With Bulb (T Channel)
(picture of actual item)
(side view)
Description: Rubber seal for most fiberglass toppers with aluminum framed rear doors
- Black
- For fiberglass toppers with aluminum framed rear doors
- 1 5/8" wide
- 3/16" "T" width
- Bulb for extra seal
- Strip that slides into the track is T shaped
- Sold in 6 foot sections
Item ID: 3928
Topper Door Perimeter Seal
(picture of actual item)
(side view)
Description: Rubber seal for most fiberglass toppers with aluminum framed rear doors
- Black
- Rubber seal for fiberglass toppers with aluminum framed rear doors
- 1/4" wide bulb
- 3/16" T slides in perimeter channel
- Sold in 10 foot sections
- Excludes ARE toppers (see below for ARE replacement)
Item ID: 3929
Topper Door Perimeter Seal - A.R.E. Toppers
(picture of actual item)
(side view)
Description: Rubber seal for most A.R.E. Fiberglass toppers with aluminum framed rear doors
- Black
- 3/8" wide bulb
- Triangle slides in perimeter channel
- Sold in 10 foot sections
- A.R.E. Toppers (see above for most other toppers)
Item ID: 3930
Leer 100XQ/100XL/100XR/100LE Rear Door Perimeter Seal
(picture of actual item)
(side view)
Description: Rubber seal for Leer 100XL/XR/LE and 100XQ attaches to the fiberglass to seal the all glass rear door
- Black
- Works on Leer 100XL/XR/XQ/LE and 180XL/XR truck toppers
- 1/2" wide, 1" height
- Bulb is tapered 1/2" to 3/4"
- Adheres with 3M automotive tape
- Sold in 9 foot sections
Item ID: 3931
Leer 100XQ Rear Door Seal
(picture of actual item)
(installed view)
Description: Leer 100XQ rear door seal
- Black
- 100XQ models only
- Self Adhesive
- 65" long
Item ID: 3932
Leer Tailgate Cover - 2009-2018 Ram Trucks 1500 (2010-2018 Ram 2500/3500)
(picture of actual item - Click to view larger - Opens in new window)
Description: Tailgate Cap Cover for 2009-2018 Dodge Ram trucks. Fills tailgate gap.
- Black
- Tape on installation
- Installs over existing tailgate cap
- Fills the gap on the top of the tailgate
- Hump on the top helps seal and prevent the tailgate from being open when the topper door is down
Item ID: 3934
Leer Truck Topper Rear Door Cable Cover/Shroud
(picture of actual item)
(side view)
Description: Rubber shroud for covering cables on fiberglass toppers with all glass rear doors. The Leer 100 XL and 100 XQ use this shroud.
- Black
- Shroud covers cables on the rear door of Leer 100XL, 100XR, and 100XQ fiberglass camper shells
- approx. 12" long by 2" wide
- Adheres with 3M automotive tape
Item ID: 3933
Ball Mount for Gas Props/Lift Cylinders - Bent
(picture of actual item)Description: Ball Mount with 5 holes - Bent
- Steel
- 10 mm Ball
- Bent Design
- 5 Holes
- Typically used on the inside of the topper door
Item ID: 2825
Ball Mount for Gas Props/Lift Cylinders - Reverse Bent
(picture of actual item)Description: Ball Mount with 5 holes - Bent - Reversed
- Steel
- 10 mm Ball
- Typically used on the bottom side of tonneau covers
- Reversed
Item ID: 2826
Ball Mount for Gas Props/Lift Cylinders - Flat
(picture of actual item)Description: Ball Mount with 5 holes - Flat
- Steel
- 10 mm Ball
- Typically used on the truck bed rails with a tonneau covers
Item ID: 2827
Ball Mount for Gas Props/Lift Cylinder - Bent 7 Hole
(picture of actual item)Description: Ball Mount with 7 holes - Bent
- Steel
- 10 mm Ball
- Typically used on the truck bed rails with a tonneau covers
Item ID: 2828
Ball Mount for Gas Props/Lift Cylinders - Double Bent
(picture of actual item)Description: Ball Mount with 3 holes - Double Bent
- Steel
- 10 mm Ball
- Typically used on truck cap doors (the door itself)
Item ID: 2829
Ball Mount for Gas Props/Lift Cylinders - 10 mm ball only
(picture of actual item)Description: Ball Mount 10 mm Ball
- Steel
- 10 mm Ball (3/8" diameter)
- Thread Length: 5/8"
- Thread Diameter: approx. 1/4"
- no other hardware included
Item ID: 2830
Ball Mount for Gas Props/Lift Cylinders - 13 mm ball only
(picture of actual item)Description: Ball Mount 13 mm Ball
- Steel
- 13 mm Ball (5/8" diameter)
- Thread Length: 5/8"
- Thread Diameter: approx. 1/4"
- no other hardware included
Item ID: 2831
Leer 100XQ Cap Side Gas Prop Bracket
(picture of actual item)Description: Leer 100XQ Gas Prop Bracket (mounts to the topper)
- Black
- 10 mm Ball
- For Leer 100XQ model camper shells
- Mounts to the Topper Side
- Same part for Driver and Passenger side (order quantity 2 if 2 are needed)
- Includes Ball Mount bracket, bolt plate and 2 nuts
Item ID: 2832
Leer 100XL/XR/LE Cap Side Gas Prop Bracket 4.3"
(picture of actual item)Description: Leer 100XL/XR/LE Gas Prop Bracket (mounts to the topper)
- Steel
- 10 mm Ball
- Length: 4.3"
- No other hardware included
Item ID: 2833
Leer 100XL/XQ/LE/XR - Button Stud with ball mount
(picture of actual item)Description: Leer 100XL Button Stud with Ball Mount - Door Side
- Black Button
- Works on all glass rear doors
- Fits in 1/2" hole
- Includes:
Button Stud
Rubber Washer
Metal Washer
Metal Nut
10 mm Ball MountItem ID: 2834
Oops, no products have been added to this category yet.
